LED TRACK LIGHT · BEAM-TR SERIES
BEAM-TR BLE Dim Track Light
20/25/30W · 145lm/W · phone scenes, no gateway.
Home / Product / LED Track Light / BEAM-TR
BEAM-TR BLE dimmable LED track light in black finish — phone-dimmed 1-100% with no gateway or signal wires.
Note: Images are for reference only. Housings and drivers can be combined to suit your preference — contact us for an accurate quotation.
BEAM-TR LED Track Light
BEAM-TR series · BLE dimming · 20W/25W/30W · 145lm/W COB inside
The BEAM-TR is a BLE dimmable LED track light pairing a 145lm/W Ra90+ COB engine with Bluetooth mesh dimming from 1 to 100%, so each head joins phone-controlled scenes with no gateway, no signal cables and no bus commissioning. It is the compatible track head for our BLE mesh dimming solution, carrying the same scene logic — pre-open, low-traffic, peak and close — onto conventional track rails.
Three power steps cover 3-5m retail ceilings: 20W at 2900lm, 25W at 3600lm and 30W at 4300lm, each in 3000K, 4000K or 5000K with 24, 38 or 60-degree beams at UGR below 22. Heads bind to the mesh by power-cycle with the store trading normally around them.
- 20W / 25W / 30W, 2900-4300lm at 145lm/W
- BLE 1-100% flicker-free dimming, phone scenes
- 3000K/4000K/5000K, CRI above Ra90, UGR below 22
- No gateway, no signal wires, PF above 0.9
Datasheet
Full specifications for all three models
| LC-TR03-BD20W | |
|---|---|
| Wattage | 20W ±5% |
| Input Voltage | 200-240V AC 50/60Hz |
| Lumen Output | 2900lm ±5% |
| CRI | Above Ra90 |
| Beam Angle | 24°/38°/60° |
| CCT | 3000K/4000K/5000K, fixed per order |
| UGR | Below 22 |
| Dimming | BLE 1-100%, phone scenes |
| Finishing | Black/White |
| LC-TR03-BD25W | |
|---|---|
| Wattage | 25W ±5% |
| Input Voltage | 200-240V AC 50/60Hz |
| Lumen Output | 3600lm ±5% |
| CRI | Above Ra90 |
| Beam Angle | 24°/38°/60° |
| CCT | 3000K/4000K/5000K, fixed per order |
| UGR | Below 22 |
| Dimming | BLE 1-100%, phone scenes |
| Finishing | Black/White |
| LC-TR03-BD30W | |
|---|---|
| Wattage | 30W ±5% |
| Input Voltage | 200-240V AC 50/60Hz |
| Lumen Output | 4300lm ±5% |
| CRI | Above Ra90 |
| Beam Angle | 24°/38°/60° |
| CCT | 3000K/4000K/5000K, fixed per order |
| UGR | Below 22 |
| Dimming | BLE 1-100%, phone scenes |
| Finishing | Black/White |
Why BEAM-TR for Phone-Dimmed Stores
Mesh scenes without gateways or wires
BEAM-TR Direct BLE Against Casambi Ecosystem Control
Wireless track lights split by ecosystem. Casambi heads serve designer-specified projects inside the Casambi app and partner stack — see the wireless Casambi track light when a lighting designer names the platform. BEAM-TR is the direct-BLE answer: phone-to-mesh dimming with no gateway hardware and the lowest wireless per-unit premium, carrying our BLE mesh dimming solution scenes onto the rail. Compare housings across the full LED track light family when a project mixes ecosystem heads with direct-BLE heads.
BEAM-TR Four Daily Scenes on One Rail
One rail now follows the trading day instead of burning full power from open to close:
- Pre-open — low warm-up: staff prep under reduced output before the doors open.
- Low-traffic — trimmed zones: non-critical aisles dim while feature walls stay bright.
- Peak — full presentation: every head at 100% for honest merchandise color.
- Close — security glow: low overnight scenes keep the storefront alive after hours.
Scenes switch from the phone with soft 0-6 second fades, and bound heads refuse third-party access until an administrator unbinds them. For whole-circuit dimming from a wall knob, see the TRIAC wall-dimmer track light; for wired bus scenes in new builds, see the 6-wire DALI track light.
BEAM-TR Retrofit Payback Without Rewiring
The mesh runs on power alone: heads bind by power-cycle, relay for each other with no single point of failure, and scale to thousands of nodes per network — a measured 30% energy cut against non-dimmed rails at roughly a $5 per-unit premium. No signal cables, no conduits opened, no trading interrupted.
One phone reaches grouped heads through the mesh — scenes follow the trading day.
| Model | How scenes run | Hardware needed | Best for |
|---|---|---|---|
| BEAM-TR (this page) | Direct BLE phone scenes | Phone only, no gateway | Retrofits, lowest wireless cost |
| VUE-C Casambi | Casambi app ecosystem | Phone plus partner stack | Designer-specified projects |
| TR0103 DALI | Wired bus scenes | Bus, gateway, commissioning | New builds, zoned white |
FAQ
Quick answers about the BEAM-TR series
Direct phone dimming versus designer ecosystem: BEAM-TR dims straight from the phone over BLE mesh with no gateway and the lowest wireless premium, while VUE-C works inside the Casambi app and partner stack that lighting designers specify.
Choose by project
- Choose BEAM-TR: retrofit, cost-led chain rollout, phone scenes today.
- Choose VUE-C: designer names Casambi on the schedule.
- Mix both: BEAM-TR for shop floors, Casambi for flagship feature zones.
The BEAM-TR ships exactly this direct-BLE configuration as 20/25/30W heads.
None of the three: the mesh runs locally on power alone — heads bind by power-cycle, relay for each other, and dim from the phone with no signal cables and no cloud dependency. A gateway only enters the picture for automated scheduling and remote access add-ons. Every BEAM-TR mesh is verified head by head before it leaves the factory.
Fixed per order, so match the goods once: 3000K flatters bakeries, wood and warm apparel; 4000K keeps chain floors neutral; 5000K reads crisp over supermarkets and drinks aisles.
Beam pairing
- 24-degree: window features and jewelry-height focal points.
- 38-degree: mannequins and mid-aisle shelving.
- 60-degree: wide washes over produce and grocery runs.
BEAM-TR holds UGR below 22 across all three beams for low-glare shopping.
Yes — grouping is logical, not wired: every head joins named groups in the app, so one rail can run the window at full, the aisle trimmed and the wall on overnight glow.
One rail, three levels
- Feature group: 100% for the new collection.
- Shelf group: 40-60% for everyday stock.
- Wall group: 10% security glow after close.
BEAM-TR regroups displays from the phone without touching a single switch.
About 30% of lighting energy at roughly a $5 per-unit premium: scheduled scenes trim non-critical zones for hours a day while peak hours keep full 145lm/W presentation light, and the 1-100% range stays flicker-free at every level. The BEAM-TR pairs that dividend with PF above 0.9, so savings hold from the first scene to the last.
Spare BLE drivers ship with each order, plus a binding checklist that walks the installer through power-cycle grouping zone by zone. The BEAM-TR driver carries full protection circuitry with CE and CB marks, so most support cases end at the grouping step.
Application
BEAM-TR in real retail and commercial spaces
You May Also Need
Hand-picked fixtures that pair with this one
Send Message
Fill out the form and we will get back to you as soon as possible