AMMONIA-RESISTANT TUBULAR LIGHT · SF01 SERIES

DURA-P SF01 Chicken House Light

40W/60W · 5600-8600lm · 140lm/W — sealed tubular light for chicken houses, swine barns and washdown-heavy farm sites.

Home / Product / Led Tri-proof Light / DURA-P

White DURA-P SF01 tubular light with stainless end caps for chicken houses

DURA-P SF01 ammonia-resistant tubular light — stainless end caps and mounting clips for chicken houses.

DURA-P SF01 poultry farm tri-proof light front view Suspended DURA-P SF01 chicken house light showing PG cable gland

DURA-P SF01 LED Tubular Light

SF01 series · ammonia-resistant · 40W/60W · IP65

The DURA-P SF01 is an ammonia-resistant LED tubular light for chicken houses, sealing its driver and LED board inside an IP65 plastic tube that stands up to ammonia, dust and high-pressure washdowns while delivering 5600-8600lm at 140lm/W.

This poultry farm tri-proof light suits layer and broiler houses, swine barns and parking lots alike: a 120° frosted beam spreads even light over birds and aisles, over-IK09 impact housing survives daily farm knocks, and suspension, ceiling or wall mounting fits new and retrofit houses.

  • 40W/60W, 5600/8600lm, 140lm/w efficacy
  • IP65 waterproof & dust-proof, over IK09 explosion-proof
  • 120° beam, frosted cover, CRI ≥80
  • Suspension/ceiling/wall mount, 220-240V AC

Datasheet

Select a model to view full specifications

LC-SF01-40W-4
ModelLC-SF01-40W-4
Wattage40W ±5%
Input Voltage220-240V AC 50/60Hz
Lumen Output5600 lm ±5%
SizeØ78×L1200
CRI≥80
Beam Angle120°
CoverFrosted
PF>0.9
LC-SF01-60W-5
ModelLC-SF01-60W-5
Wattage60W ±5%
Input Voltage220-240V AC 50/60Hz
Lumen Output8600 lm ±5%
SizeØ85×L1200
CRI≥80
Beam Angle120°
CoverFrosted
PF>0.9
DURA-P SF01 tubular light dimensions drawing 1200mm length

Why DURA-P Survives Chicken Houses

Sealed against ammonia, dust and washdowns

DURA-P SF01 sealed tube: a cylindrical LED tube with end caps, seal rings and PG gland blocking ammonia, dust and washdown NH3 ammonia dust washdown jet house air · blocked at the seal line 120° frosted beam PG gland seal rings plastic cap

Sealed plastic tube: ammonia, dust and washdown jets stop at the seal line

DURA-P SF01 Sealed Tube Against Ammonia and Moisture

Sealed plastic tube with silicone rings and PG waterproof gland leaves ammonia no way in — ordinary tubes fade fast in poultry air: ammonia corrodes drivers and sockets, dust cakes onto lenses, and the pressure washer between flocks finishes the job. The SF01 answers with a sealed plastic tube — silicone rings at both ends, a PG waterproof cable gland and stainless mounting clips leave ammonia and moisture no way in, so this poultry farm tri-proof light keeps working where home-grade tubes fail.

The seal is only half the story. A 140lm/W engine turns 40W into 5600lm and 60W into 8600lm through a 120° frosted cover that spreads glare-free light over birds instead of glaring into their eyes, roughly halving lighting energy against the old fluorescent tubes it replaces. For oily, solvent-heavy workshops rather than livestock air, see the FORT-A linear high bay for oily factories in the same protection family — and for bathrooms and corridors that need a compact wall or ceiling fitting, the AQUA-D waterproof bulkhead for bathrooms covers those rooms.

Choose tubular for the house and match every other room to its fitting: this page covers the DURA-P chicken house light for washdown zones, while the broader LED tri-proof light series for harsh sites lists every protection-rated fitting in one place.

ModelFormBest for
DURA-P SF01Sealed tubular, 40/60WChicken, swine and washdown houses
FORT-ALinear high bay, tempered glassOily factories and warehouses
AQUA-DRound bulkhead, sensor optionsBathrooms, corridors and balconies

Size the Light to the House

40W or 60W, and three ways to hang it

SF01 40W and 60W Choices for Chicken Houses

Match wattage to house and mounting height.

  • 40W tube 5600lm Ø78×L1200 — layer tiers, chick areas and low 2.5–3m ceilings
  • 60W tube 8600lm Ø85×L1200 — broiler halls and wide aisles at 3–4m
  • 140lm/W with PF >0.9 — efficient and grid-friendly for farm rows

This IP65 waterproof tubular light hangs in continuous rows, so add tubes — not bigger tubes — when the house gets longer.

Three mounts — suspension, ceiling and wall — with accessories in the box. Mount it three ways — suspension wires for open halls, ceiling brackets for low sheds, wall arms over side aisles — with accessories in the box and video guidance for the crew.

  • Suspension wires for open halls — even rows over wide broiler floors
  • Ceiling brackets for low sheds — fast fix to low farm ceilings
  • Wall arms over side aisles — lights aisle without blocking equipment

Layers need 14–16 hours of steady light for egg output while broilers follow step-down programs, so TRIAC and 0-10V standard plus DALI on request ties the house into the farm controller under the official DALI Alliance lighting control standard.

SF01 mounting options: suspension wires, ceiling brackets and wall arms on the same sealed cylindrical tube, 40W for tiers and 60W for broiler halls suspension open halls ceiling low sheds wall arm side aisles 40W · 5600lm tiers & chick areas 60W · 8600lm broiler halls

Three mounts, two wattages — rows extend as the house gets longer

FAQ

Tough tri-proof answers for harsh environments

Sealed plastic tube with silicone rings and PG gland holds IP65 — poultry litter releases ammonia that corrodes drivers, sockets and steel clips of home-grade tubes, while dust and moisture finish them off. The SF01 seals everything inside a plastic tube with silicone rings at both ends, a PG waterproof cable gland and stainless clips, carrying a full IP65 rating — so ammonia, dust and water never reach the electronics.

IP65 survives pressure washdowns between flocks — yes, that is what it is built for. IP65 means water jets from any direction cannot get in, so the standard turn-around washdown is safe. Stainless clips will not rust, the frosted cover wipes clean, and the over-IK09 housing takes the odd knock from equipment. Do not submerge it; IP65 covers jets, not immersion.

TRIAC and 0-10V standard plus DALI on request for layer and broiler programs — yes, layers hold 14–16 hours of steady light for egg output while broilers follow step-down schedules, and the SF01 follows both with TRIAC and 0-10V dimming as standard plus DALI on request, so the house can run dawn-dusk curves from the farm controller instead of simple on-off.

40W for tiers and low ceilings, 60W for broiler halls — take the 40W tube (5600lm, Ø78×L1200) for layer tiers, chick areas and ceilings under 3m; take the 60W tube (8600lm, Ø85×L1200) for broiler halls and wide aisles at 3–4m. Both run at 140lm/W with PF >0.9. For long houses, extend the row with more tubes rather than upsizing — send your house dimensions for a free layout.

Three mounts with video guidance and 220-240V AC retrofit wiring — three options: suspension wires, ceiling brackets and wall arms. Mounting accessories ship in the box with step-by-step video guidance, and the 220-240V AC input wires straight into existing farm circuits — no new trunking for retrofits.

Rated 50000 hours on imported chips and ENEC driver — rated life is 50000 hours — years of flock cycles — built on imported LED chips and an ENEC-certified driver that holds output steady through heat, dust and daily dimming curves.

Samples in 7 days, bulk in 15 days with OEM/ODM — samples in 7 days, bulk orders in 15 days. Wattage, tube length and finishing can be customized, and OEM/ODM projects are welcome — send house size and quantity to [email protected] for a fast quotation.

Application

SF01 in farms, parking and harsh environments

Send Message

Fill out the form and we will get back to you as soon as possible