LED TRACK LIGHT · VUE-3 SERIES
VUE-3 3-Wire DIP Track Light
24/30/40W · DIP power + CCT · single-circuit rail.
Home / Product / LED Track Light / VUE-3
VUE-3 3-wire DIP selectable LED track light in white finish — power and CCT preset by DIP switch at install.
Note: Images are for reference only. Housings and drivers can be combined to suit your preference — contact us for an accurate quotation.
VUE-3 LED Track Light
VUE-3 series · 3-wire single-circuit · 24W/30W/40W · DIP 2-in-1 inside
The VUE-3 is a 3-wire DIP selectable LED track light built around the Allooking ALF adapter, which combines DIP power selection and CCT selection in one 3-wire single-circuit adapter. One SKU covers up to nine power and tone combinations, set once with the power off at installation — so distributors stock one head instead of nine.
It clicks straight onto the 220-240V single-circuit rails already hanging in most small shops — no rail replacement, no dimmer, no control wires — and runs on/off at up to 40W with flicker-free output. Every VUE-3 ships with a 5-year warranty.
- 24W / 30W / 40W DIP power, 400-1050mA selectable
- DIP CCT tones, warm / neutral / cool white
- 3-wire single-circuit adapter, 220-240V on/off
- PF above 0.9, flicker-free, 5-year warranty
Datasheet
Full specifications for all three models
| LC-VUE3-24W | |
|---|---|
| Wattage | 24W max, DIP 400/500/600mA |
| Input Voltage | 220-240V AC 50/60Hz |
| Output Voltage | 30-40V DC |
| Power Factor | Above 0.9 |
| Efficiency | 84% |
| Flicker | Flicker-Free |
| CCT | DIP dial, warm / neutral / cool |
| Dimming | Non-dim, on/off |
| Adapter | 3-wire single-circuit, 172*32*47mm |
| Finishing | White/Black/Grey |
| LC-VUE3-30W | |
|---|---|
| Wattage | 30W max, DIP 550/650/750mA |
| Input Voltage | 220-240V AC 50/60Hz |
| Output Voltage | 30-40V DC |
| Power Factor | Above 0.9 |
| Efficiency | 88% |
| Flicker | Flicker-Free |
| CCT | DIP dial, warm / neutral / cool |
| Dimming | Non-dim, on/off |
| Adapter | 3-wire single-circuit, 172*32*47mm |
| Finishing | White/Black/Grey |
| LC-VUE3-40W | |
|---|---|
| Wattage | 40W max, DIP 850/950/1050mA |
| Input Voltage | 220-240V AC 50/60Hz |
| Output Voltage | 30-40V DC |
| Power Factor | Above 0.9 |
| Efficiency | 88% |
| Flicker | Flicker-Free |
| CCT | DIP dial, warm / neutral / cool |
| Dimming | Non-dim, on/off |
| Adapter | 3-wire single-circuit, 172*32*47mm |
| Finishing | White/Black/Grey |
Why VUE-3 for Single-Circuit Rails
One SKU for the rails shops already have
VUE-3 3-Wire DIP Against 3-Phase DIP Selectable Lights
Selectable-output lights share one idea — configure once, stock less — but they fit different rails. A 3-phase DIP head serves new commercial builds on 3-phase rails with multi-circuit zoning — see the 3-phase DIP selectable track light when a new store wires three circuits from day one. VUE-3 brings the same DIP logic to the 3-wire single-circuit rail: the low-cost, widely installed 220-240V rail already hanging in boutiques, groceries and chain refits. Compare housings across the full LED track light family when a project mixes 3-phase new builds with single-circuit refits.
VUE-3 One SKU Instead of Nine
Distributors serving single-circuit shops face a familiar pile-up: three wattages times three tones equals nine SKUs on the shelf. VUE-3 folds that matrix into one head per power band:
- Power DIP — match the ceiling: 400 to 1050mA in three steps per band, from 24W accent heads to 40W high-bay replacements.
- CCT DIP — match the merchandise: warm for bakeries and wood, neutral for apparel, cool for supermarkets and drinks aisles.
- Set once at install: power off, two DIP banks, click onto the rail — the setting never drifts in staff hands.
For live hand adjustment instead of preset stock logic, see the knob dimmable track light; for wall-dimmer circuits, see the TRIAC wall-dimmer track light.
VUE-3 Non-Dim Simplicity at the Lowest Cost
No dimmer means no compatibility testing, no flicker complaints and no control premium: plain on/off wiring, PF above 0.9, flicker-free output and up to 88% driver efficiency. VUE-3 fits common 3-wire single-circuit profiles from GLOBAL, POWERGEAR and equivalents, in white, black or grey to match the existing rail.
Two DIP banks on the adapter — power plus tone, preset before first switch-on.
VUE-3 DIP 2-in-1 adapter (Allooking ALF): 400-1050mA power steps with CCT selection.
| Model | Rail needed | How output is set | Best for |
|---|---|---|---|
| VUE-3 (this page) | 3-wire single-circuit, existing | DIP power + CCT, power off | Refits and volume distributors |
| VUE-D 650 | 3-phase rail, new or existing | DIP power + CCT, power off | New commercial builds |
| VUE-K knob | 4-wire track | Knob + dial, live by hand | Staff-tuned displays |
FAQ
Quick answers about the VUE-3 series
Same DIP idea, different rails: VUE-3 presets power and tone for 3-wire single-circuit rails — the low-cost 220-240V rail in most small shops — while the 650 presets for 3-phase rails in new commercial builds with multi-circuit zoning.
Choose by rail
- Choose VUE-3: single-circuit rail exists, one on/off circuit, refit or rollout.
- Choose 650: 3-phase rail with zoning for a new store.
- Mix both: VUE-3 for refitted branches, 650 for new flagships.
The VUE-3 ships exactly this 3-wire preset configuration as 24/30/40W heads.
Power off, two DIP banks, done in seconds: the installer slides the power bank to the current step matching the ceiling height and the CCT bank to the tone matching the merchandise, then clicks the head onto the rail. Settings hold permanently — staff cannot drift them by accident, unlike live controls. Every VUE-3 DIP position is function-tested before it leaves the factory.
Fits 220-240V 3-wire single-circuit profiles — including common GLOBAL, POWERGEAR and equivalent rails — in white, black or grey to match. It does not fit 3-phase or 6-wire DALI rails, 48V magnetic systems, or 120V North-American tracks: send us a rail end photo with your inquiry and we confirm the adapter keying before production. The VUE-3 keys against mis-plugging on supported profiles.
Because most refitted shops never dim: non-dim removes dimmer compatibility testing, flicker complaints and the control premium, leaving the lowest per-head cost with PF above 0.9 and flicker-free on/off light. If a zone truly needs dimming, step up within the family — wall dimmer, knob head or wireless scenes — and keep VUE-3 where plain switching rules. The VUE-3 holds its price advantage at every order size.
Up to nine combinations per power band: three current steps times three white tones, so one 40W head covers everything from a dim 600mA warm accent to a full 1050mA cool high light. Distributors stock three VUE-3 bands instead of dozens of fixed-output SKUs, and chain rollouts ship one carton per band with settings done on the ladder. The VUE-3 cuts dead stock instead of discounting it.
Standard warranty is 5 years with spare DIP 2-in-1 adapters shipped with each order, plus a rail-compatibility checklist matched to your track brand before mass production. The VUE-3 driver carries full protection circuitry with CE and CB marks, so most support cases end at the DIP-setting step.
Application
VUE-3 in real retail and commercial spaces
You May Also Need
Hand-picked fixtures that pair with this one
Send Message
Fill out the form and we will get back to you as soon as possible