LED TRACK LIGHT · VUE-R SERIES
VUE-R DALI RGB Track Light
30W RGBW · DALI DT8 · 4-wire retrofit, no new rail.
Home / Product / LED Track Light / VUE-R
VUE-R DALI RGBW LED track light in white finish — DALI color control integrated into the 4-wire adapter.
Note: Images are for reference only. Housings and drivers can be combined to suit your preference — contact us for an accurate quotation.
VUE-R LED Track Light
VUE-R series · DALI DT8 RGBW · 30W · 4-wire retrofit inside
The VUE-R is a DALI RGBW track light built around the Allooking ADA30 adapter, which packs DALI and RGBW dimming into a 4-wire single-circuit track adapter. Existing 4-wire rails upgrade to color scenes with no rail replacement: two conductors keep carrying mains on one circuit while the other two become the DA+ / DA- signal bus.
Each 30W head runs a white channel for daily merchandising plus RGB channels for seasonal and event scenes, addressed individually over DALI DT8 from the existing bus. One VUE-R rail does the daytime shop floor and the nighttime brand wall. Every VUE-R ships with a 5-year warranty.
- 30W RGBW, W280mA white plus RGB140mA color
- DALI DT8 single-address color and white control
- 4-wire retrofit: no new rail, one mains circuit
- PF above 0.9, flicker-free, 5-year warranty
Datasheet
Full specifications for the model
| LC-VUER-30W | |
|---|---|
| Wattage | 30W ±5% |
| Input Voltage | 220-240V AC 50/60Hz |
| Output Current | W280mA / RGB140mA |
| Output Voltage | 20-40V DC |
| Power Factor | ≥0.9 |
| Efficiency | 85% |
| Flicker | Flicker-Free |
| Control | DALI DT8, single address per head |
| Adapter | 4-wire single-circuit, 189*32*46mm |
| Finishing | White/Black/Grey |
Why VUE-R for Retrofit Color Scenes
Old 4-wire rail stays, color scenes move in
VUE-R 4-Wire Retrofit Against 6-Wire New-Build DALI
Four-wire and six-wire DALI solve different projects. A 6-wire rail carries three mains circuits plus the DALI bus for multi-zone new builds — see the 6-wire DALI track light when a new store needs zoned white light from day one. VUE-R is the retrofit answer: it clicks onto the existing 4-wire rail, where an electrician re-terminates two conductors as the DA+ / DA- signal pair and leaves a single mains circuit, so color scenes arrive with no rail replacement and no ceiling rework. Compare housings across the full LED track light family when a project mixes retrofitted color rails with new-build white rails.
VUE-R White Days and RGB Nights on One Rail
One rail now covers two trading modes, switched from the DALI bus:
- Daytime — white channel: clean white merchandising light for the shop floor, windows and fitting rooms.
- Launch — brand color wash: RGB channels paint walls and feature zones in campaign colors for drops and seasons.
- Night — low mixed scenes: dimmed color accents keep the storefront alive after closing without full white output.
Every head keeps its own DT8 address on the single bus, so the window glows brand red while the aisle stays white. For hand-set white dimming without any bus, see the knob dimmable track light; for wireless per-fixture scenes, see the wireless Casambi track light.
VUE-R Single-Circuit Simplicity for Refits
One mains circuit means one breaker, one switch, one straightforward handover — the color intelligence lives on the DALI pair, not in the power wiring. VUE-R fits EUTRAC, ERCO, IGUZZINI and the common 4-wire profiles, with anti-plug keying so heads seat safely, plus full protection circuitry and CE and CB marks behind the 5-year warranty.
Two conductors become the DALI bus — the rail itself never comes down.
VUE-R DALI RGBW adapter (Allooking ADA30): W280mA white plus RGB140mA color, DT8 addressed.
| Model | Rail needed | Circuits | Best for |
|---|---|---|---|
| VUE-R (this page) | Existing 4-wire rail reused | 1 mains + DALI pair | Retrofits adding color |
| TR0103 DALI | New 6-wire DALI rail | 3 mains + DALI bus | New builds, zoned white |
| VUE-C Casambi | Existing 3-phase rail | Mains only, wireless scenes | Refits avoiding signal wires |
FAQ
Quick answers about the VUE-R series
Retrofit color versus new-build zoning: VUE-R reuses the existing 4-wire rail with one mains circuit plus a DALI signal pair to add RGBW scenes, while the 6-wire system needs a new DALI rail with three mains circuits for zoned white light.
Choose by project
- Choose VUE-R: rail stays up, store wants color scenes.
- Choose TR0103: new ceiling, three white zones from day one.
- Mix both: VUE-R color rails for feature zones, 6-wire rails for general aisles.
The VUE-R ships exactly this 4-wire retrofit configuration as 30W RGBW heads.
The rail stays, only its ends are re-terminated: an electrician lands two conductors on the DALI bus as DA+ / DA- and leaves one mains circuit for power, then VUE-R heads click on like ordinary track heads. No rail replacement, no ceiling rework, no new cable runs — budget one short power-off window per rail and the store reopens with color. Every VUE-R adapter is keyed against mis-plugging on supported 4-wire profiles.
Yes — power is shared, addresses are individual: all heads draw from the single mains circuit, but every VUE-R head keeps its own DALI DT8 address, so color commands reach each fixture separately.
One rail, three looks
- Window heads: brand color for the campaign.
- Shelf heads: white for honest merchandise color.
- Wall heads: slow color rotation after closing.
VUE-R regroups scenes from the DALI controller without touching the wiring.
The dedicated white channel carries daytime trading: it runs at W280mA for a clean white floor light, while the three RGB channels at 140mA each mix brand and seasonal colors on top. Tell us the white tone and CRI target on your plan and we confirm the bin before production — fashion whites and gallery whites are matched per order. Every VUE-R white channel is verified to its marked tone before it leaves the factory.
One breaker, one switch, simpler handover: every head on the rail shares the same mains circuit, so power switching is all-together while scene differences come from DALI addresses. Count total wattage per rail against the existing breaker — at 30W per head a typical rail carries its usual head count with margin — and keep three-circuit zoning expectations for 6-wire new builds. The VUE-R pairs that simplicity with 85% driver efficiency and flicker-free output on every scene.
Standard warranty is 5 years with spare DALI-RGBW adapters shipped with each order, plus a rail-compatibility checklist matched to your track brand before mass production. The VUE-R driver carries full protection circuitry with CE and CB marks, so most support cases end at the addressing step.
Application
VUE-R in real retail and commercial spaces
You May Also Need
Hand-picked fixtures that pair with this one
Send Message
Fill out the form and we will get back to you as soon as possible