LOW CARBON TECLUX
LED Track Light Manufacturer
We manufacture LED track lights for retail stores, supermarkets and museums: four VUE and VARO series cover high-CRI general retail, fresh-food spectra, zoomable gallery optics and 9-in-1 selectable stock. Every head runs on standard track and ships factory-direct since 2010. Start from the full product catalog, compare LED linear lights, or see fixtures planned room by room in our retail lighting solution.
Made in Zhongshan, China · No MOQ · Samples: 7 working days · Bulk orders: 15-25 working days · FOB Shenzhen
Led Track Light
High-CRI track spotlights for retail stores, supermarkets and museums — shop by group
Integrated Driver LED Track Light
VUE and VARO heads with integrated driver in track adaptor — non-dim, knob, 0-10V, TRIAC or DALI per project, same head fits all.
VUE-F Meat & Bakery
Fresh-food track light for supermarkets, meat and bakery
View VUE-F Fresh Food Light
LED BLE Smart Track Light
BEAM-TR with external driver box — phone scenes over BLE, fixed smart configuration.
LED Track Rail System
Rails and connectors to mount every head on this page — pick the rail by circuit count and dimming route, heads click straight on. Lengths, finishes and connector kits are confirmed per order: send your layout in the form below and we match rail, connectors and heads as one set.
8-Wire Rail System
Multi-circuit rail for large commercial layouts, built to order
View 8-Wire Rail System3-Wire Rail System
One circuit switches every head together: the economical pick for supermarkets and small shops running non-dim, knob-dimming or TRIAC heads from the tables above. Straight rails join with live-end, middle and L connectors plus end caps; surface, suspended and recessed mounting confirmed per order.
4-Wire Rail System
Three separately switchable circuits on one rail: zone hero walls, aisles and windows independently, and run 0-10V, TRIAC, DALI or smart adaptors from the system tables above. The standard rail for boutiques, galleries and chain stores that re-scene often.
6-Wire Rail System
Three power circuits plus a control bus for addressed heads: DALI DT6/DT8 and 0-10V versions from the system dimming table above dim and zone each fitting from one controller. For new builds and large floors where scenes change daily.
8-Wire Rail System
Extra circuits plus control lines for large commercial layouts that need more zones than a 6-wire rail carries. Built to order around your circuit plan — send the zone list and load schedule in the form below and we engineer the rail, connectors and heads as one set.
Track driver compatibility
Every head on this page runs on a matching integrated-driver track adaptor
Non-dim | Knob dimming | System dimming | Smart dimming
All our track heads mount on standard 2-wire, 3-wire and 4-wire track, and each head pairs with an integrated-driver track adaptor instead of an external driver box — the only exception is the BEAM-TR, which works with an external driver box. The non-dim series below keeps the cost down for supermarkets and multi-head projects: dial the output current or wattage with a DIP switch, or pick the colour temperature on site with a 3 step by DIP selector, so one stocked head covers several lamp specs. Special spectra such as the fresh-food whites fit every head except tunable-white and RGB versions. Dimming, DALI and smart versions follow the same table format.
Non-dim series
Non-dim adaptors are the economical pick for project business: once the CCT and wattage are fixed in the lighting design, there is nothing left to adjust on site. Distributors use the DIP-selectable versions to cut stock — one adaptor covers several CCT and power combinations instead of nine fixed SKUs.
| Track adaptor | Track / circuits | Dimming | Selectable CCT | Selectable power |
|---|---|---|---|---|
| 4 Wire Non Dim Dip Switch Currents Track Adaptor | 4-wire · 3-circuit | — | — | 3 step by DIP |
| 4 Wire Non Dim Dip Switch + CCT 2 in 1 Track Adaptor | 4-wire · 3-circuit | — | 3 step by DIP | 3 step by DIP |
| 4 Wire Non Dim CCT (C-CW-W) Track Adaptor | 4-wire · 3-circuit | — | 3 step by DIP | — |
| 4 Wire Non Dim 3 Currents Dip Switch Track Adaptor | 4-wire · 3-circuit | — | — | 3 step by DIP |
| 3 Wire Non Dim Dip Switch Currents Track Adaptor | 3-wire · 1-circuit | — | — | 3 step by DIP |
| 3 Wire Non Dim Track Adaptor | 3-wire · 1-circuit | — | — | 3 step by DIP |
| 3 Wire Non Dim Dip Switch + CCT 2 in 1 Track Adaptor | 3-wire · 1-circuit | — | 3 step by DIP | 3 step by DIP |
| 2 Wire Non Dim Dip Switch Currents Track Adaptor | 2-wire · 1-circuit | — | — | 3 step by DIP |
Knob dimming series
Knob-dimming adaptors suit spaces that re-tune brightness often: turn the dial on each head to dim steplessly at any time, with no control system to commission.
| Track adaptor | Track / circuits | Dimming | Selectable CCT | Selectable power |
|---|---|---|---|---|
| 3 Wire Knob Dim Track Adaptor | 3-wire · 1-circuit | Knob | — | — |
| 4 Wire Knob Dim Track Adaptor | 4-wire · 3-circuit | Knob | — | — |
| 4 Wire CCT(C-CW-W) + Knob Dim Track Adaptor | 4-wire · 3-circuit | Knob | 3 step by DIP | — |
System dimming series
System dimming joins the building controls: 0-10V and TRIAC for wired retrofits, DALI DT6/DT8 for addressed heads on one-circuit or three-circuit track. The DALI RGBW head mixes colour scenes for fashion and fresh-food zones where colour sells the goods.
| Track adaptor | Track / circuits | Dimming | Selectable CCT | Selectable power |
|---|---|---|---|---|
| 4 Wire 0-10V Dim Track Adaptor | 4-wire · 3-circuit | 0-10V | — | — |
| 6 Wire 0-10V Dim Track Adaptor | 6-wire · 3-circuit | 0-10V | — | — |
| 4 Wire Triac Dim Track Adaptor | 4-wire · 3-circuit | TRIAC | — | — |
| 4 Wire Triac Dim + CCT Track Adaptor | 4-wire · 3-circuit | TRIAC | 3 step by DIP | — |
| 3 Wire Triac Dim Track Adaptor | 3-wire · 1-circuit | TRIAC | — | — |
| 4 Wire DALI Dim DT6/DT8 Track Adaptor | 4-wire · 1-circuit | DALI DT6/DT8 | — | — |
| 4 Wire DALI/RGBW Dim Track Adaptor | 4-wire · 1-circuit | DALI RGBW | — | — |
| 6 Wire DALI Dim DT6/DT8 Track Adaptor | 6-wire · 3-circuit | DALI DT6/DT8 | — | — |
Smart dimming series
Smart adaptors commission from a phone over CASAMBI or TUYA mesh, with no gateway wiring and no control cabinet. Chain stores and retrofit projects rezone scenes per season without calling an engineer back.
| Track adaptor | Track / circuits | Dimming | Selectable CCT | Selectable power |
|---|---|---|---|---|
| 4 Wire Smart Dim + Knob Dim Track Adaptor | 4-wire · 3-circuit | Smart + Knob (CASAMBI / ALLUMIN) | — | — |
| 4 Wire Smart Dim Track Adaptor | 4-wire · 3-circuit | Smart (CASAMBI / TUYA) | — | — |
| 4 Wire CASAMBI RGBCW Dim Track Adaptor | 4-wire · 3-circuit | Smart RGBCW (CASAMBI) | — | — |
Need something off the shelf? We build to order. Pick the spectrum — standard 3000K/4000K, fresh-food whites, tunable white or RGBW — the dimming route from the four tables above, the track (2/3/4-wire, single or three circuit) and the finish. We match the head, adaptor and driver as one set and ship every order with a wiring diagram. Tell us your scenario in the form below and get a project quote in 24 hours.
What our LED track lights cover
Factory notes for distributors and project buyers
An LED track light is the adjustable layer in retail lighting: heads slide along the track, aim at the merchandise and re-aim when the display changes, instead of locking light where the ceiling grid happens to be. As an LED track light manufacturer, we build this range for stores that rearrange often: fixed-beam heads for stable hero walls, zoomable heads for galleries that re-hang, fresh-food spectra for supermarket counters, and selectable CCT and wattage versions that let distributors cover several projects from one stocked SKU.
When you compare track lighting fixtures, start with four functions. First, color fidelity: high-CRI heads keep reds, skin tones and packaging true under shop light, which is where a retail track spotlight either earns its place or gets value-engineered out. Second, beam control: narrow beams for mannequins and sculptures, wide beams for wall washes, zoom for spaces that change. Third, dimming and track compatibility, so heads work with existing tracks and control gear. Fourth, thermal and mechanical build, because store staff re-aim heads daily and cheap yokes go loose. Pair accent track with LED downlights for ambient layers and LED linear lights for long aisles.
Typical applications: supermarket produce and fresh-food zones, apparel hero walls and fitting areas, museum and gallery walls, boutique window displays. For full room-by-room layouts see the retail lighting solution, and for the reasoning behind track over fixed fittings read why choose track lighting for retail stores.
FAQ
Quick answers before you specify
Fresh zones take the VUE-F fresh-food track light with dedicated meat, bakery and produce spectra. General aisles and apparel walls take VUE-S at CRI90 for true reds and skin tones. Galleries take the zoomable VARO-Z.
Stable layouts take VUE-S with fixed 15/24/36° optics. Spaces that re-hang often take the VARO-Z zoomable track light with stepless 10-55° adjustment on the same CRI90 platform.
CRI80 flattens reds and skin tones that sell apparel and fresh food. Our whole retail track range is CRI90 and above. The retail lighting solution shows where CRI90 pays back fastest.
The VUE-D selectable track light dials three CCTs times three wattages on site, so one SKU covers nine combinations across boutique, supermarket and gallery projects.
Send Message
Fill out the form and we will get back to you as soon as possible