LED Industrial Light Manufacturer

Quick comparison — why each housing fits its place

Rule of thumb: PC battens and tubes spread a wide ~110° flood with no lens control, so they suit low ceilings (2–5 m) — parking decks, corridors, poultry and food rooms. Above ~6 m only the lensed FORT-A high bay (50°×100° optic) still puts lux on the floor instead of the walls.

Image	Model	Housing and optics	Protection	Ceiling	Best for — why
	TUBU-A	round tube Ø76mm	IP65	2.5–5 m	Damp rooms and wash areas — 150lm/W Ø76mm round tube; sheds water and dust where flat battens trap grime on top, twist-off end cap for fast corridor rows.
	TUBU-C	thin linkable tube, PMMA option	IP65	3–5 m	Poultry and farm runs — links into long rows off one feed; PMMA resists ammonia haze better than standard PC.
	DURA-P	sealed all-plastic tube, diffuse	IP65	3–5 m	Chicken houses (details) — plastic body stands ammonia air that corrodes alloy end-caps; sealed ends survive daily pressure washing.
	WIDE-A	wide PC batten, ~110° flood	IP65	3–5 m	Warehouses and damp workshops — widest diffuser in the family covers low ceilings evenly; sealed shell where painted metal rusts.
	SLIM-B	narrow batten 48mm	IP65	2.5–4 m	Corridors and service runs — 48mm is the narrowest body in the family, made for tight mounting spots.
	VAPO-A	narrow batten 62mm	IP65	3–5 m	Workshops and utility rooms — the default vapor-tight pick where no special profile or mounting applies.
	OVAL-A	oval batten 75×68mm	IP65	2–3.5 m	Wet rooms and wash areas — rounded oval diffuser instead of a flat rectangle.
	ALUM-A	batten on exposed alu rail + brackets	IP65	3–6 m	Factories and plant rooms — exposed heatsink rail on bracket feet, the only rail-mounted build here.
	TOLS-W	flat batten 79mm wide	IP65	3–5 m	Workshops and plants — 79mm is the widest measured flat profile, so one fitting covers more floor per watt.
	TOLS-N	flat batten 74×27mm, twist-off end cap	IP65	2.5–4 m	Car parks and corridors — twist-off end cap opens without tools for faster wiring and maintenance.
	SUSP-A	wide PC batten, wire suspension	IP65	3–6 m	High open ceilings — wire kit drops the batten into the work zone where surface mounting is too far.
	FORT-A	aluminum + tempered-glass 50°×100° lens	IP65	6–12 m	High racking aisles, manufacturing — the only fitting here with real beam control; the lens throws lumens down the aisle so floor lux holds at height where 110° PC battens wash walls and fall off.
	AQUA-D	compact round bulkhead, wide flood	IP65	2–3.5 m	Corridors, stairs and entries — round body with wide sensor coverage; microwave sensor + emergency as standard (round details).
	AQUA-AB	round PC amber bulkhead, blue-free glow	IP65	2–3.5 m	Beach-facing walls, boardwalks and resort corridors — amber engine with the same sensor + emergency platform (amber details).
	AQUA-R	compact rectangular bulkhead, wide flood	IP65	2–3.5 m	Corridors, stairs and bathrooms — rectangular body sits cleaner over doors and in compact rooms; microwave sensor + emergency as standard (rectangular details).

Sizes run 600/1200/1500mm with 3000/4000/5000K; mounting is surface or suspended, tubes add clamp fit. Pick PMMA over PC where acids, oils or car-wash detergents attack the cover, and 316 clips where rust streaks matter. T8 retrofit shells reuse the same extrusion without light source or driver. For lux and spacing math use the lighting calculator before fixing counts.

Tri-proof means sealed against water, dust and chemistry: one fitting family for places that kill ordinary indoor lights. As an LED tri-proof light manufacturer, we build this range for poultry houses, warehouses, car parks, corridors and wet rooms: sealed tubes that survive ammonia air and washdowns, linear high bays with dimming for racking aisles, and sensor bulkheads with emergency backup for stairs and entries.

Save energy with sensors, not just efficacy. The range works with microwave sensors that see around corners, presence sensors that track occupied versus unoccupied states, infrared (PIR) versions for body-heat detection in defined areas such as bathrooms, and daylight harvest sensors that trim output when sunlight suffices — dimming or switching off empty aisles and corridors instead of burning full power all night. DALI-2 models such as the FORT-A linear high bay take this further to Class A Ready under EN ISO 52120-1, the highest EU building-automation grade: DALI Parts 251, 252 and 253 report energy and diagnostics over the bus, corridorDIM automates corridor levels, and constant-light-output control holds brightness steady as LEDs age. Check IP and IK ratings, sensor type and hold-time settings, and whether the driver dims with your building system before comparing lumens. Clean retail interiors without moisture or dust belong with LED downlights and track lights instead.

Typical applications: broiler and layer houses, distribution centers and workshops, office corridors, stairwells and bathrooms, car parks and entries. Sensor behavior is explained in the PIR vs microwave vs presence sensor guide.