LOW CARBON TECLUX CO., LTD
LED Lighting Solutions for Shops, Gardens and Smart Control
One hub for every project shape — shop and store fit-outs, villa and hotel outdoors, and retrofit control routes — each entry pairing matched fixtures with layout guidance, Dialux support and a 5-year warranty
Home / Solution
Start from the building, not the catalogue. Shop and supermarket fit-outs begin with our retail store lighting plans, which combine track accents, linear runs and downlights into priced layouts. Villa, hotel and landscape exteriors begin with our villa garden bollard lighting plans, which set bollard heights, spacing and colour temperature per zone. Whatever needs dimming, scenes or platform control begins at our wireless and wired control routes for retrofit floors, which sorts each floor into exactly one control route before any fitting is chosen.
Each entry below names its project shape in one line and hands off to the guide carrying the working detail. For early budgeting, the lighting calculator for warehouses and stores turns target lux into fixture counts before Dialux. Where dimming must live inside the heads themselves over radio, Bluetooth mesh control covers that fitting-level layer without new signal cable.
Smart Control and Planning Tools
Seven focused guides — open only the entry that matches the floor
Which Entry Matches Your Project
Seven rows, one per guide — open only the row that fits
| Project shape | One-line difference | Guide |
|---|---|---|
| Corridors, stairwells and washrooms needing sensing plus hand control | Standalone zones set up on site, no gateway in the loop | |
| Occupied offices and retail needing dimming without new cable | Commands travel by radio while each zone keeps its mains wiring | |
| Large floors keeping installed buses while adding radio devices | A bridge pair joins kept wiring to new radio devices and platforms | |
| Compact rooms where controller budgets make no sense | Rooms run themselves after handheld or phone setup, no cabinet | |
| Any retrofit floor unsure which control shape fits | Hub compares every route, then hands off to one focused guide | |
| Live stores needing dimming inside the heads | Track, linear and downlight heads dim over radio, no new wires | |
| Early budgets needing fixture counts fast | Target lux turns into counts before the full Dialux pass |
Pick one row per zone; buildings mixing zones follow two rows rather than forcing one guide onto every floor.
FAQ
Short answers here — setup detail lives in the linked guides
Start with the retail store plans for the fitting layout — then add the wireless retrofit guide only where dimming must work without new cable.
- One layout pairs accent spots with continuous runs for aisles and counters.
- Scenes and grouping move into the mesh layer instead of new cable.
Start with the villa garden bollard plans — which fix heights, spacing and colour temperature before any fitting is ordered.
- Path, lawn and poolside zones each get their own height and spacing row.
- Warm 2700K calms private gardens while 4000K keeps hotel routes legible.
Yes — open the smart lighting hub and follow its mesh row — which dims occupied floors with no new cable in the ceiling.
- Fittings keep their existing mains feeds; only the control layer changes.
- Grouping and scenes move into software that staff run from phones.
Run the lighting calculator for early counts, then request Dialux for the final layout — every entry ships with a 5-year warranty.
- Target lux plus room size turns into a fixture count in minutes.
- Final layouts, scenes and pricing follow from the project inquiry.
Send Message
Fill out the form and we will get back to you as soon as possible